Olympus-OM
[Top] [All Lists]

Re: [OM] Trouble in OM paradise

Subject: Re: [OM] Trouble in OM paradise
From: Jim Couch <JamesBCouch@xxxxxxxxxxxxx>
Date: Mon, 17 Dec 2001 00:17:47 -0800
A good majority of the current CF frames do not use aluminum at all. On the
CF/Aluminium frames being currently, hard anodizing or coatings are used on the
aluminum to prevent galvanic corrosion.

Jim Couch

Josh Putnam wrote:

> Tom@xxxxxxxxxxxxx writes:
>
> >I've read that carbon fibre is about 1/2 the weight of aluminum in a
> >similar application. Titanium is 25 0.000000e+00avier than aluminum. In 
> >resin, it's
> >probably not conductive, so could serve as a substrate for circuits.
>
> At least in bicycle frames, CF proved conductive enough to cause
> electrolysis failures in early CF/aluminum frames.  I don't
> recall how this was resolved, but it's not a problem on current
> commercial CF/aluminum frames as far as I know.


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz