Olympus-OM
[Top] [All Lists]

Re: [OM] dead A1L

Subject: Re: [OM] dead A1L
From: "John Hermanson" <omtech@xxxxxxxxx>
Date: Mon, 17 Dec 2001 23:20:24 -0500
peel up rubber strip at edge, take out screws before prying open.
_________________________________
John Hermanson
Camtech, Olympus OM Service since 1977
631-424-2121  www.zuiko.com
Call Olympus for FREE manuals!
1-800-221-3000
_________________________________
----- Original Message -----
From: "Mike" <watershed@xxxxxxxxxxxxxxx>
To: "Olympus-Digest" <olympus@xxxxxxxxxxxxxxx>
Sent: Monday, December 17, 2001 12:57 PM
Subject: Re: [OM] dead A1L


> From: "John Hermanson"
>
> Install new 6V lithium battery. That's probably all it needs.
>
Is this a DIY job? I probably could do it if the batteries are available
with leads, assuming soldering is needed. I haven't taken the case apart
as there are no screws and so i assume one would have to just pry it
apart then reglue after repair.

mike

--
Latitude 48° 32' North, Longitude 123° 7' West



< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >




< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz