Ok. Thanks much for the information!
Is this a special olympus grommet or, is this something
one could find at a hardware store?
----- Original Message -----
From: <clintonr@xxxxxxxxxxxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Monday, January 14, 2002 10:23 AM
Subject: Re: [OM](Winder troubles)
> A spinning motor is usually due to a bad rubber grommet that translates
the
> rotation of one gear to another -- it can be replaced. And the post that
> aligns the winder with the body (if it's been broken off) can be replaced,
> too....
>
> Jon Wichman wrote:
>
> > I recently got an OM-2n from eBay with a busted winder 2.
> >
> > You turn it on and, it winds and winds and winds but, never
> > advances the film. I think there's a little pin that's supposed to
> > go into the camera body that's missing.
> >
> > I'd say that the motor's fine though! You can see it spinning the
> > gears and everything.
> >
> > Let me know if you want to work out a deal.
> > I don't shoot that fast anyway...
> >
> > Jon
> >
> > < This message was delivered via the Olympus Mailing List >
> > < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> > < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|