Or remove pressure plate and bend the springs on the back so it'll apply
more pressure and keep the film in the channel.
_________________________________
John Hermanson www.zuiko.com
Camtech, Olympus Sales & Service since 1977
New OM & Used, Digital, Pearlcorders, Binoculars
21 South Lane, Huntington NY 11743-4714
631-424-2121
_________________________________
----- Original Message -----
From: "Jon Wichman" <jwichman@xxxxxxxxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Thursday, January 24, 2002 2:39 PM
Subject: Re: [OM] Skewed Frames
> > Kinda reminds me of the old pavement on the New York State
> > Thruway. Rise-drop, rise-drop, rise-drop, risedrop...
> >
> > Yes, every frame is skewed. As in rotated by half a degree or
> > so on the film. I'm guessing that the film is not travelling
> > perfectly horizontal across the opening.
> >
> > AG
>
> AG,
>
> Well, I'm not a betting man (when do you want to hit the boat in Keokuk
> next?)
> but, after reading all of the ideas, I'm still going to go with my first
> thought.
> I think it's the pressure plate. Try switching backs with another camera
> and see if that helps.
>
> Jon
>
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
>
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|