Olympus-OM
[Top] [All Lists]

Re: [OM] Zuiko 85mm f2.0 data

Subject: Re: [OM] Zuiko 85mm f2.0 data
From: frieder.faig@xxxxxxxxxxxxxxxxxxxxxxxxx
Date: Thu, 7 Feb 2002 14:40:44 +0100
On Thu, Feb 07, 2002 at 10:42:38AM -0000, David Lee wrote:
> No, your treatment is only correct for a single thin lens, where the two 
> principal planes are in the same place.  For a thick or compound lens, the 
> image plane is 2xf from the rear principal plane and the subject plane 2xf 
> from the front principal plane.  (You can consider the two principal planes 
> as the effective position of an equivalent thin lens when viewed from in 
> front and behind).  Depending upon lens design, the separation between the 
> two principal planes can be either positive or negative, giving a working 
> distance greater or smaller than your calculation suggests.  
> 
> For example at 1:1 the 50mm/1.4 lens has a working distance of about 51mm 
> compared to about 69mm for the 50mm/3.5 macro despite only 1mm difference in 
> the lengths of the lenses.  

For exact calculation, I´d also like to know this data from Olymus. May be 
Olympus didn`t
publish this values because they redeigned some lenses several times, which 
might has impact 
on this values. 

> 
> Correcting your arithmetic gives a 1:1 working distance of only 165mm (6.5 
> in) for the 85mm lens.  However taking the minimum focus distance (850mm) and 
> minimum field size (250x170mm) from a 
table on the (presently defunct) e-SIF site gives a helicoid extension of 12mm 
for this lens - which sounds reasonable - and a magnification of x0.14.  This 
leads to a front principal plane 59mm IN FRONT of the lens barrel and a 
whopping 229mm (9 in) of working distance when extended to 1:1. 

Hmm, my table says: minimum field size of 290 x 190 mm @ 850mm focus distance.
-> Helicoid extension 10.7mm; I´ve meassured 12mm Extension - what is wrong?
     -  Oh it is a floating element design - does the focal length change? -  
is it really 85mm?

I can focus my 85mm (5E/4G) to 820mm, where I can see 270x181 mm in the OM-1 
viewfinder.

This gives a magnification about 0.125. My guess for the principle planes is a 
distance of -6mm
to make the values consistant with the data from Olympus.
You can see the results of my calculations at:

http://studweb.studserv.uni-stuttgart.de/studweb/users/mas/mas12462/Optik/Makro/Makro_85.html

Remember: I´m guessing too. But a 1:1 distance about 6in seems reasonable to me.


Frieder Faig

< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz