Olympus-OM
[Top] [All Lists]

Re: [OM] Om10 with shutter/exposure problem

Subject: Re: [OM] Om10 with shutter/exposure problem
From: "Sabrina Smith" <wickedfather@xxxxxxxxxxx>
Date: Sat, 16 Feb 2002 02:21:46 +0000
Hi again.

You'll be happy to know it all worked! When I first touched the material at the bottom of the lightbox I thought that it was made of some sort of black ceramic because to the touch it's like a ceramic nail file, so I thought the instructions in the camera repair faq were wrong for the Om10 (it saying Om-F and G). But I gently probed the small hole on the left and voila!

John, the problem was also occuring with the manual adaptor, but I really liked having the extra information.

Ok, another quicky. I know that the Om10 takes exposure readings off the film, and when this problem first started I had a look at the trouble shooting bit at the back of the manual and it said that the camera would make longer exposures when there was no film in, because of the inside back being black, so I cut a small length from a film and put it inside. But I noticed that the colours of film isn't quite the same. I compared a 200 ASA and a 400 ASA from different manufacturers and one was markedly darker. Is this anything to be concerned about? I really want to 'use' this camera to be creative, and not just click away like with my other 35mm (which seems like a toy now).

Anyway, a big thanks to everyone who's helped so far.

S.



From: john@xxxxxxxxxxxxxxxx
Reply-To: olympus@xxxxxxxxxxxxxxx
To: olympus@xxxxxxxxxxxxxxx
Subject: Re: [OM] Om10 with shutter/exposure problem
Date: Fri, 15 Feb 2002 19:54:48 +0000
Do you have a manual adaptor? If you have, does this happen in manual
as well?  If it does, it may well be a sticky magnet problem.

BUT, if it it happens *only* in auto, it's very likely to be the ASA
resistor that lives under the film speed dial. It gets "dirty" over
time and the first few shots way over exposed like you are getting is
the classic symptom. Try turning the film speed dial to and fro
several times before making the first exposure. Does that alleviate
the problem? If it does, it's definitely a dirty ASA resistor. No big
deal to get it fixed as part of a CLA.

Let's know what happens.

Regards


John Gruffydd (Mold, Wales, UK)

_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp.


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz