Any T flash can be used on a plain 2 using either Shoe 3 or TTL Conn. 3.
The T20 would require the TTL Conn. T20 to provide a socket for the TTL
cord.
_________________________________
John Hermanson www.zuiko.com
Camtech, Olympus Sales & Service since 1977
New OM & Used, Digital, Pearlcorders, Binoculars
21 South Lane, Huntington NY 11743-4714
631-424-2121
_________________________________
----- Original Message -----
From: <Pschings@xxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Cc: <ronaldcormier@xxxxxxxxxxx>
Sent: Thursday, March 07, 2002 1:41 PM
Subject: Re: [OM] Which OM body?
> In a message dated 03/07/2002 1:31:27 PM Eastern Standard Time,
> ronaldcormier@xxxxxxxxxxx writes:
>
>
> "So here's the crux of it: Should I get another OM-2 to take advantage of
> the QA310 setup, or should I go all out & get a 4Ti... or is this too much
> camera for my current gear? And can my new T20 be used TTL with an OM-2
> body (not a OM-2n)? Any suggestions would be appreciated."
>
>
> If you can find a decent OM-4Ti at a good price, go for it. You won't look
> back! Don't neglect the OM-2S either. I'm not sure what you mean by the
> OM-4Ti being "too much camera for your current gear". Flip it to manual
and
> it works (almost) just like your OM-1. Start there then play with the
> additional features. You'll soon wonder how you ever lived without spot
> metering.
>
> Yes, you can use the T20 in TTL mode with an older OM-2. You need a shoe 3
or
> TTL Auto Connector 3, though.
>
> Of course, what you really need is both an OM-2 and an OM-4Ti.
>
> Paul Schings
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
>
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|