Olympus-OM
[Top] [All Lists]

Re: [OM] T32 deaths

Subject: Re: [OM] T32 deaths
From: "Bernd Moeller" <dsl33687a@xxxxxxxxxxxxxxxxx>
Date: Mon, 11 Mar 2002 18:02:54 +0100
Hi, 

After having lost the bottom part of my T32 due to using the BG2 (and to make 
it worse: with an omnibounce reflector) a couple of times, I have glued it to 
the flash body with epoxy glue. I unscrewed the bottom part and made sure that 
extra glue came into the holes where the 4 tiny screws go. That did the job. No 
problems any more.

Bernd

----- Original Message ----- 
From: "Ian A. Nichols" <I.A.Nichols@xxxxxxxxxxxxx>
To: "Olympus List" <olympus@xxxxxxxxxxxxxxx>
Sent: Monday, March 11, 2002 10:59 AM
Subject: Re: [OM] T32 deaths


> 
> 
> On Sat, 9 Mar 2002, Gary Edwards wrote:
> 
> > Lost my second T32 to falls from a BG-2.  Guess I'll have to start duct
> > taping them in - they seem to release on very slight bumps, despite having
> > been tightened up as much as I dare with that plastic wheel.
> 
> Those thumbwheels, IMO, are a pain.  You tighthen them so much you can't
> untighten them without mechanical assistance and still they fall out or
> at least move far enough to disconnect.  Granted they're about the only
> way you could secure a flash in a standard hot (or cold) shoe, but
> something better could have been done for the BG2, I'm sure.  Some sort
> of spring clip that snaps shut when you push the T32 in and has to be
> pushed out of the way to release it would have been good. 
> 
> Hmm, I think I can feel a 3rd party modification coming on (do I count
> as a 3rd party?)
> 
> -- 
> ________________________________________________________________________
> *             |                                                        |
> |  /  | |/-\  |                      Ian A. Nichols                    |
> | |   | |   | |             http://www.chm.bris.ac.uk/~cpian/          |
> |  \-/| |  /  |                  i.a.nichols@xxxxxxxxxx                |
> |             *                    iann@xxxxxxxxxxxxx                  |
> ------------------------------------------------------------------------
> 
> 
> 
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
> 
> 


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz