I've had similar good experiences with the 2N and BG2 (haven't tried much
with the Winder, though). Just make sure you keep all the connectors and
cables right. the BG2 is useless unless you can connect the flash to the
camera!
-----Original Message-----
From: owner-olympus@xxxxxxxxxxxxxxx
[mailto:owner-olympus@xxxxxxxxxxxxxxx]On Behalf Of James N. McBride
Sent: Tuesday, March 26, 2002 2:45 PM
To: olympus@xxxxxxxxxxxxxxx
Subject: RE: [OM] 2 Flashes
<snip
The combination of OM-2N, Bounce Grip 2,
Winder, and T-32 never failed me.......NEVER. I do love that system!
/jim
<snip>
-----Original Message-----
From: owner-olympus@xxxxxxxxxxxxxxx
[mailto:owner-olympus@xxxxxxxxxxxxxxx]On Behalf Of Skip Williams
Sent: Monday, March 25, 2002 6:28 PM
To: olympus@xxxxxxxxxxxxxxx
Cc: dickallen@xxxxxxxxxxxxxxxxxxx
Subject: Re: [OM] 2 Flashes
OK, say you have the flash meter at the subject and the OM-2/T-32 on
TTL-Auto. You also have the remote flash on as a slave. Normally (in
non-TTL mode), you'd fire the main flash to trigger the slave, and then the
flashmeter would tell you what aperture to use for the whole setup.
But with TTL-Auto, that is not necessary. The camera tells the flashes when
to cut off in real-time via the silicon cell in the camera.
I can't think of anyway to use a flashmeter with this setup. <<
<<< big snip
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|