Olympus-OM
[Top] [All Lists]

Re: [OM] Foam question

Subject: Re: [OM] Foam question
From: "John Hermanson" <omtech@xxxxxxxxx>
Date: Fri, 29 Mar 2002 09:33:49 -0500
Cut on a non-grained surface (like rubber) so the blade won't get pulled
around.  Press down with a metal straight edge,  slice with a new single
edge razor blade or exacto #11.
_________________________________
John Hermanson  www.zuiko.com
Camtech, Olympus Sales & Service since 1977
New OM & Used, Digital, Pearlcorders, Binoculars
21 South Lane, Huntington NY 11743-4714
631-424-2121
_________________________________
----- Original Message -----
From: "Mike" <watershed@xxxxxxxxxxxxxxx>
To: "Olympus-Digest" <olympus@xxxxxxxxxxxxxxx>
Sent: Thursday, March 28, 2002 6:33 PM
Subject: Re: [OM] Foam question


> From: Joshua Putnam
>
> > When I make my own light seals, I use polyurethane foam that I
> > order from McMaster Carr.  It's a bit denser than factory foam,
> > and more durable.  They carry US, not metric, thicknesses, but
> > 1/16" and 1/32" work well for most seals.
> >
> I assume that it comes in sheets and then you cut it into strips for
> use. What do you use to cut it? How wide? Would a straight edge and
> razor knife work? Paper cutter?
>
> mike
>
>
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
>



< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz