Olympus-OM
[Top] [All Lists]

Re: [OM] Modified T-45

Subject: Re: [OM] Modified T-45
From: clintonr@xxxxxxxxxxxxxxxx
Date: Tue, 09 Apr 2002 19:21:29 -0500
I suspect (if you don't have the schematic) that you can check with a meter and
see which pin of the TTL plug on the bracket goes to which pin going to the T-45
body.  If it worked before you modified it, and the pins are corrected properly,
it should still work....

Bryan Pilati wrote:

> I have a T-45 that I modified because of the poor design of the base
> attachment/contact assembly.  Now I can't get it to go off under the control
> of the camera.  The test button works fine.  I'm pretty sure I have the
> wiring correct, but can't figure out what's wrong.  Any ideas, anyone else
> ever try to be a Olympus engineer?
>
> Bryan Pilati
> OM-2N
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz