Dear Andy, dear clintonr,
thanks for your advice. I think for the moment I will leave it like it is,
I became a bit scared.
Best regards, Thomas
>----------------------------------------------------------------------
>
>Date: Fri, 24 May 2002 13:13:56 -0500
>From: clintonr@xxxxxxxxxxxxxxxx
>Subject: Re: [OM] battery problem (?) with motor drive 2
>
>The MD-2 is quite difficult to open without tearing the circuit -- it's
>the sort
>of thing that takes at least four hands, if you don't know how! (This may be
>the problem, BTW -- someone may have opened it and tore the flex -- it's
>rather
>thin, akin to what other cameras like C*n*n and N*k*n use, not typical of
>Olympus.)
>
>First you'll need to remove the plate with the contacts that couple it to the
>power supply -- once the covers are separated, the portion of the flexible
>circuit that goes to the contacts has to be carefully tucked so that it comes
>out through the opening, then it can be turned sideways and slipped back out
>with the pad intact (no need to unsolder it). There's one wire (brown, I
>think)
>that connects the battery holder to the circuit that has to be unsoldered.
>
>Andy Gilbert wrote:
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|