The inner lip of the battery cap thread area is different on the 2/2N bottom
covers. In one instance the battery cap will not screw on all the way
because it hits the plastic insert in the 2/2N battery box.
_________________________________
John Hermanson www.zuiko.com
Camtech, Olympus Sales & Service since 1977
21 South Lane, Huntington NY 11743-4714
631-424-2121 For Free Olympus manuals,
please call 1-800-221-3000
_________________________________
----- Original Message -----
From: "Mark Dapoz" <md@xxxxxxxxxxxx>
To: "olympus @ Zuiko . sls . bc . ca" <olympus@xxxxxxxxxxxxxxx>
Sent: Wednesday, May 22, 2002 7:43 PM
Subject: Re: Re: [OM] OM-1 serials was Prism rot
>
> On Thu, 23 May 2002, Wayne Harridge wrote:
>
> > Was there any change to the bottom plate between the OM-1 and the 1N ?
Are
> > the bottom plates interrchangeable ?
>
> No, no difference, they're interchangeable, and they're also
interchangeable
> with OM-2's. Just like OM-3's and OM-4's use the same bottom plate. The
> finish is different on the OM-4Ti bottom plate but it'll still fit on the
> OM-3 and OM-4.
> -mark
>
>
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|