Olympus-OM
[Top] [All Lists]

Re: [OM] help with winder 1

Subject: Re: [OM] help with winder 1
From: "Bill Stanke" <bstanke@xxxxxxxxxxxx>
Date: Sat, 6 Jul 2002 08:47:49 -0700
Mike,

On my Winder 1 there is an unmarked detent between the Single and DC 4-6v
position.  This appears to be another off position.  There is a second
detent opposite the "v" in DC 4-6v.  The winder is active at this switch
position.

HTH,

Bill Stanke
----- Original Message -----
From: "Mike" <watershed@xxxxxxxxxxxxxxx>
To: <olympus-digest@xxxxxxxxxxxxxxx>
Sent: Saturday, July 06, 2002 8:29 AM
Subject: [OM] help with winder 1


I've taken my winder 1 apart with the hope of changing it into both a
winder and a power supply for the modeling lights on macro flashes. This

seems to be easily doable by soldering a short jumper between the
battery switch position and the remote 4-6v power switch position. The
actual switch that isolates the battery pack when the remote power is
connected seems to be built into the socket and is not accessible. But
first I would like to be sure what each switch position does. So I was
hoping to get someone with a functioning winder 1 and remote power
supply to check something for me. On the bottom of the handle the switch

has an OFF position and a SINGLE position and also is marked with a 4-6v

position. But there are two click stops in the 4-6v position. This is
what I would like to have clarified. It appears from the inside of the
switch that one of these positions is another unmarked OFF position
between 4-6v and SINGLE. Could someone confirm this? Thanks

Mike

--
Latitude 48° 32' North, Longitude 123° 7' West



< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >




< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz