Olympus-OM
[Top] [All Lists]

RE: [OM] New OM-1 user.

Subject: RE: [OM] New OM-1 user.
From: "Lee Penzias" <l_penzias@xxxxxxxxxxx>
Date: Wed, 21 Aug 2002 00:02:38 -0500
I have an MR-9 adapter from CRISCAM which I recently used in my OM-1n alongside my Canon A-1. I checked the OM-1 against the A-1's meter and they were for practical purposes identical in readings. I then shot (indoors) a roll of Kodak T-Max 100 and a roll of old Agfapan 25 B&W - and based on this, at least in my case, the MR-9 adapter and a silver 76 battery work fine.

Cheers
Lee

----Original Message Follows----
From: "Lewis V. Bishop" <lewis.bishop@xxxxxxxxxxxxxxxxxxxx>
Reply-To: olympus@xxxxxxxxxxxxxxx
To: <olympus@xxxxxxxxxxxxxxx>
Subject: RE: [OM] New OM-1 user.
Date: Tue, 20 Aug 2002 22:49:32 +0100

Well i have received my MR-9 adapter + 386 batteries from criscam (that was quick) and it is the brushed metal (matt looking not chrome) version (if that helps anyone).

Seems to work as expected although i will know once i have the roll back from the developers. Thanks to all for the help, hopefully that'll be my battery problem solved! Now just need to get hold of a OM-1N or 2N black body for a spare... ;-)

Lewis.


-----Original Message-----
From:   Joel Wilcox [mailto:jowilcox@xxxxxxxxxxxxxxxxxxx]
Sent:   Sat 8/3/2002 10:27 PM
To:     olympus@xxxxxxxxxxxxxxx
Cc:
Subject:        Re: [OM] New OM-1 user.

At 12:57 PM 8/3/2002 -0500, John Lind you wrote in part:
>IMPORTANT NOTES ABOUT SILVER CELLS THAT HAPPEN TO BE THE SAME SIZE:
>There is a difference between the specifications for a #301 and a #386,
>and between an EPX76 (aka MS76) and a #357:
>
>        mAh  Volt  ANSI #  Wt(g)  Dia(mm)  Ht(mm)
>------------------------------------------------
>#301:  110  1.55  1132SO  1.7     11.6     4.2
>#386:  120  1.55  1133SO  1.7     11.6     4.2
>------------------------------------------------
>#357:  175  1.55  1131SO  2.3     11.6     5.4
>EPX76: 200  1.55  1107SOP 2.27    11.6     5.4
>------------------------------------------------
>
>The data sheets also show differences in application and in voltage
>falloff over their lifespans.
>
>#301:
>Intended for continuous low drain.  Data sheet test for voltage falloff is
>at 0.103 mA.  Voltage drops from 1.5 to 1.3 Volts during last 50f life.
>
>#386:
>Intended for continuous low drain with high pulse drain on demand.  Data
>sheet test for voltage falloff is at 0.238 mA.  Voltage drops from 1.5 to
>1.3 Volts during last 50f life.
>
>EPX76:
>Intended for photo use.  Data sheet test for for voltage falloff is at
>0.215 mA. Voltage falls from 1.5 V to about 0.9 V during last 600f life.
>
>#357:
>Intended for continuous low drain with high pulse drain on demand.  Data
>sheet test for voltage falloff is at 0.238 mA.  Voltage drops from 1.5 to
>1.3 Volts during last 100f life.
>
>My conclusions:
>(a) For the older MR-9's for which C.R.I.S. stated they used the larger
>MS76 cells, it is *much* better to use #357 cells in them instead due to
>the voltage falloff curves!
>(b) For the newer MR-9's that C.R.I.S. states should use the #386 cells,
>these are a better choice than using #301 cells.  The #386 cells will last
>a bit longer and tolerate higher drain.

John,
Thank you, as always.  I got the SR43 off the actual package my latest MR-9
came in (it was the only thing I could read as the rest was in Japanese)
and #301 off an equivalence table somewhere.  I guess I remember the #386
now that you mention it, but I had no basis for selecting one or the other
before you posted.  Much appreciated.

Now -- do you know of a way of determining which MR-9 is which by physical
markings?  The only difference I can see is that my older one (for SR44) is
very shiny, whereas the new one (for SR43) is brushed chrome.  The diode in
each says "2A".  It is the same for you?

Joel W.


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >





<< winmail.dat >>




_________________________________________________________________
MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz