Underneath the rubber grip are 4 set screws -- they're probably a little
loose. Tighten them evenly, then check focus. Replace the grip and glue with
a little bit of contact cement all the way around underneath the grip.
Benson Russell wrote:
> Hello all, but particularly techies...
>
> I've just got a silvernose 50/3.5 with mint optics and body (ST£160, serial
> no 105509) BUT...
> I've noticed a slight bit of play in the focus ring (0.2mm front to back,
> 0.27mm side to side) and consequently the front barrel. Not much, just a
> tiny clunk as I move it back and forwards.
>
> Certainly looks lovely otherwise, any comments? A good copy lens?
>
> Ben Russell
>
> Ireland
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|