Olympus-OM
[Top] [All Lists]

Re: [OM] OM-2 circuitry

Subject: Re: [OM] OM-2 circuitry
From: "John Hermanson" <omtech@xxxxxxxxx>
Date: Mon, 14 Oct 2002 08:55:25 -0400
Could be a bad meter ground.  Even though the OM-2 meter housing is all
metal, the coil itself turns inside a very small bearing which is
responsible for the connection to the body.
_________________________________
John Hermanson  www.zuiko.com
Camtech, Olympus Sales & Service since 1977
21 South Lane, Huntington NY 11743-4714
631-424-2121 For Free Olympus manuals,
please call 1-800-221-3000
_________________________________
----- Original Message -----
From: "William Sommerwerck" <williams@xxxxxxxxxx>
To: "Olympus group" <olympus@xxxxxxxxxxxxxxx>
Sent: Sunday, October 13, 2002 12:40 PM
Subject: [OM] OM-2 circuitry


> I can't speak for the OM-2S, but the OM-2 was flaky. The needle would
> sometimes drop abruptly, then come back up slowly. I thought it was a
sample
> defect, but I've heard other owners with the same complaint.
>
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
>



< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz