Look at the contacts of the switch with a loop while holding the shutter
open with the B setting.
Try gently cleaning the contacts of the motor drive switch inside the bottom
cover. There are no wires involved.
_________________________________
John Hermanson www.zuiko.com
Camtech, Olympus Sales & Service since 1977
21 South Lane, Huntington NY 11743-4714
631-424-2121 For Free Olympus manuals,
please call 1-800-221-3000
_________________________________
----- Original Message -----
From: "Bolty" <boldbolty@xxxxxxxxxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Monday, December 16, 2002 11:34 PM
Subject: [OM] Need Help on Winder 2
> I just fanged a winder 2 for AUS $30 (approx US $17) for my OM-10. The
other
> winder had given the ghost. I know the new one works (have tried it on a
> couple of bodies) but now for some reason it wont work on my OM-10. Does
> anyone have info on what the electronics in the OM-10 should be like so I
> can check mine and make sure that I don't have any loose wires inside my
> OM-10's body. I found the camera so much easier with the winder working
for
> the type of images that I like to take.
> Thanks Adam
>
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
>
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|