Your lens is an Adaptall (-1) lens rather than an Adaptall-2 lens, but at
any rate probably a similar formulation to the SP 35-80 2.8-3.8. Comes up
on eBay quite often, and sells a bit cheaper usually. Cosmetics match the
older series of Tamron lenses, and that may be the only difference.....
Roger Key
John Wheeler wrote:
G'day Zuiks,
On the subject of Tamron 35-80's I've just been given (by a mate who
retrieved it from the local tip) a Tamron 35-80/f2.8~3.5 Macro marked 'BBAR
MULTIC'. It's been well used but the glass is clear and a little attention
to the blades which tend to stick a little and perhaps a lube on the barrel
may be all it needs. Is this the same lens that Roger is writing about?
Actually, it was attached to a working OM-2 which can probably be restored
to reasonably pristine order.
John.
PS Hey, maybe this is a 'Fang'!
Roger Key wrote:
Fortunately I have one of those with my 35-80 SP. It is also marked
'1:3.5-4.5 35-70', so you might find it with one of those lenses (model
09A) (generally a good deal cheaper than the 35-80 SP). Be warned that it
is a rubber hood that stores flat, and has a tendency to revert to the flat
format whilst mounted on the lens. It gives very little flare protection at
80mm.
Roger Key
Ian Skully wrote:
And I'd like one for the Tamron 35-80 SP please :-)
Regards
Ian
-----Original Message-----
From: owner-olympus@xxxxxxxxxxxxxxx
[mailto:owner-olympus@xxxxxxxxxxxxxxx]On Behalf Of Roger D. Key
Sent: 13 January 2003 10:06
To: olympus@xxxxxxxxxxxxxxx
Subject: [OM][WTB] Tamron SP 24-48mm Lenshood
If anyone knows where I can find a lenshood for the Tamron SP 24-48mm lens,
I would be very grateful!
Roger Key, Copenhagen
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|