"George M. Anderson" wrote:
>
> OK, I've got the answer.
>
> Look at the underside of the 250 film back, IOW, where the bottom of the
> camera and the motor drive would be if they were installed. On the right
> (take-up) side there's a knurled knob marked 'clamp'. On the other side in
> appx the same position is a metal stop which will contact the bottom of the
> camera when it's installed. If this stop is fixed in place, the back will
> work only with the OM-1 and -2. If the stop is removeable via a screw, it
> will fit all the cameras.
>
> The reason is the -4s are taller than the -1 and -2. I never realized this
> before. So the stop must be removed to allow the -4T to fit and then
> screwed back on to hold it in place.
>
> So which do you have, Chris?
>
> George
>
Going by the pictures on eBay, and looking at mine, he had(it is now
sold) the newer back.
John
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|