No glue please, an epoxied flash will / may make the flash un-serviceable in
the future (or you may atleast need the entire lower case replaced).
_________________________________
John Hermanson www.zuiko.com
Camtech, Olympus Sales & Service since 1977
21 South Lane, Huntington NY 11743-4714
631-424-2121 For Free Olympus manuals,
please call 1-800-221-3000
_________________________________
----- Original Message -----
From: "Moose" <olymoose@xxxxxxxxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Saturday, March 29, 2003 3:33 AM
Subject: Re: [OM] Flash for OM-1
> The part should still be available. The instructions are topic O8) here
> <http://brashear.phys.appstate.edu/lhawkins/photo/camrep.faq.html>. The
> part # is in there too.
> Or, of course, you could get instructions for the permanent, but
> possibly somewhat unaesthetic, epoxy repair from Walt ;-)
>
> Moose
>
> Wayne Harridge wrote:
>
> >The replacement feet were available as spares from Olympus a year ago
> >for a few $, doing the change over is a bit fiddly but you don't need to
> >be an expert.
> >
> >>OK, I'm going to embarrass myself royally here... but I've used a T32 on
an OM-2n with a Shoe 4 with no damage to the camera... but ripped the
> >>hot shoe foot off the flash when I absentmindedly picked the assembly up
by the flash. Is there any way I can fix the flash for less than the price
of a replacement one?
> >>
>
>
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
>
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|