Thank you, what others said about using some brown rubber cement is on the
button. Use something like Pliobond, Hobsco's "Goo" or similar product.
_________________________________
John Hermanson www.zuiko.com
Camtech, Olympus Sales & Service since 1977
21 South Lane, Huntington NY 11743-4714
631-424-2121 For Free Olympus manuals,
please call 1-800-221-3000
_________________________________
----- Original Message -----
From: "John Duggan" <john.duggan1@xxxxxxxxxxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Monday, April 07, 2003 12:31 PM
Subject: Re: [OM] (OM) 135 macro lens hood repair.
> John, I posted that I had bought a 135mm macro hood on which the rubber
had
> been badly superglued to the anodised aluminium base. Took ages to get
apart
> and clean with acetone . Rubber is now "loose" on collar. Did NOT want to
> use superglue to re-attach. Best suggestion - from Moose ..brown latex
based
> contact cement used sparingly.. Regards, John Duggan, Wales, UK.
> ----- Original Message -----
> From: "John Hermanson" <omtech@xxxxxxxxx>
> To: <olympus@xxxxxxxxxxxxxxx>
> Sent: Monday, April 07, 2003 2:54 PM
> Subject: Re: [OM] (OM) 135 macro lens hood repair.
>
>
> > I'd answer but this question didn't have the whole thread attached, I'm
> > coming in late on this one. Super glue tends to run like water and
leaves
> a
> > milky mark, it never looks factory.
> > _________________________________
> > John Hermanson www.zuiko.com
> > Camtech, Olympus Sales & Service since 1977
> > 21 South Lane, Huntington NY 11743-4714
> > 631-424-2121 For Free Olympus manuals,
> > please call 1-800-221-3000
> > _________________________________
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|