Olympus-OM
[Top] [All Lists]

Re: [OM] Missing pin on an Auto Connector 4.

Subject: Re: [OM] Missing pin on an Auto Connector 4.
From: clintonr@xxxxxxxxxxxxxxxx
Date: Fri, 25 Apr 2003 11:11:37 -0500
Which pin?  If it's the one for the ready light, you _could_ use it OK on an
OM-2n -- the other pin provides the TTL connection, all you'd loose would be
the ready-light-in-the-viewfinder feature.  If not, don't throw it away -- the
parts can be used to rebuild others!

"Curtis P. Hedman" wrote:

> Just received (as a freebie) an auto connector 4 which is missing one of
> the two connector pins.  Is it feasible to attempt a repair, or should this
> be tossed into my bin of "not really spare parts"? Looking down into the
> well where the pin is missing, I can see where it looks like the pin was
> seated - looks clean, etc. Can the connector 4 be no-destructively
> disassemble to make the repair?  Any thoughts/suggestions will be
> appreciated!  Curt
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz