Olympus' part number for this part is likely either CA924300 or CE159300 -- the
former for the older lenses with "one piece mounts", the latter for lenses with
"two piece mounts". But almost any short 1.2mm screw should work, as long as it
doesn't screw in too deeply -- there may be mechanisms inside that would be
hampered by screws that go in too far.
Douglas Tourtelot wrote:
> I am looking for a few other things:
>
> 1) The "stop screw" from Zuiko lenses that keeps the lens from rotating past
> the release point on the camera mount.
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|