Olympus-OM
[Top] [All Lists]

Re: [OM] Getting rid of engraving (was KEH Bargain = silvernose?)

Subject: Re: [OM] Getting rid of engraving (was KEH Bargain = silvernose?)
From: "John Hermanson" <omtech@xxxxxxxxx>
Date: Tue, 10 Jun 2003 09:02:21 -0400
I checked my parts lists but I don't think I have any CB1289 (new filter
ring silver edged 100 f2.8)
_________________________________
John Hermanson  www.zuiko.com
Camtech, Olympus Sales & Service since 1977
21 South Lane, Huntington NY 11743-4714
631-424-2121 For Free Olympus manuals,
please call 1-800-221-3000
_________________________________
----- Original Message ----- 
From: <Doggre@xxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Tuesday, June 10, 2003 4:52 AM
Subject: [OM] Getting rid of engraving (was KEH Bargain = silvernose?)


>
> One method would be to carefully sand down the high spots (and ONLY the
high
> spots) where the engraving has raised the metal (220 grit if deeply
engraved,
> followed by 400 grit, or just 400 grit, if lightly engraved).  Then prime,
> sand, reprime and resand as necessary until smooth and the engraving is no
longer
> obvious, then repaint.  Done well with an airbrush, it should look like
new.
>
> Rich
>



< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz