Olympus-OM
[Top] [All Lists]

Re: [OM] OM-2n AUTO problem

Subject: Re: [OM] OM-2n AUTO problem
From: "John Hermanson" <omtech@xxxxxxxxx>
Date: Mon, 16 Jun 2003 08:46:31 -0400
There's a series of interlocking levers under the circuit which  facilitate
going from auto to manual, and using reset.  In your case, they have jumped
over each other to the wrong position.
_________________________________
John Hermanson  www.zuiko.com
Camtech, Olympus Sales & Service since 1977
21 South Lane, Huntington NY 11743-4714
631-424-2121 For Free Olympus manuals,
please call 1-800-221-3000
_________________________________
----- Original Message ----- 
From: "M. Sparks" <mms@xxxxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Saturday, June 14, 2003 11:33 AM
Subject: [OM] OM-2n AUTO problem


>
> I also have a problem 2n.  Works great in Manual, but AUTO behaves just
> like manual.  I figured maybe a dirty switch.  But . . .
>
> Then I noticed it also won't "reset" by the switch (but it will at "B"
> just like a plain 2)
>
> So I figure I have a mechanical problem, where something is not moving
> properly under that switch.
>
> Any ideas?
>
> Morgan
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
>



< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz