I'm getting a mix.. Some underexposed, some overexposed. 1/3rd of a
stop is evident in the slides, but not so in print. I can be off by 1
full stop and still be ok on print, but not on slide..
Albert
My experience with slides is that right from the very start, the OM-1
meter was good enough to give me 950f my slides nicely exposed, and
with a few years now of experience and knowledge, I find that it's very
rare for me to get a badly exposed slide. Are your slides coming out
consistently underexposed or overexposed, or a mixture of the two? If
consistently one way, I'd certainly suspect there's a problem with the
meter.
Roger
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|