Olympus-OM
[Top] [All Lists]

Re: [OM] polarizer question

Subject: Re: [OM] polarizer question
From: "Walt Wayman" <hiwayman@xxxxxxxxx>
Date: Wed, 27 Aug 2003 10:07:10 -0400
I ground the front threads off a couple of Tiffen filters, an 812 
and a red enhancer, to add to my set of rear filters for my Tamron 
300/2.8.  No problem.  But the same idea probably won't work with 
a polarizer.  Since most of them come in a rotating mount, the 
whole package is a lot thicker than a regular filter, and I doubt 
you could shave enough off one to make it fit.  The Tamron 
polarizer made for the filter holder is simply a regular threaded 
filter that you just screw around one way or the other in the 
holder for the desired rotation.  And it's really not much of a 
problem to orient it.  Just look through the filter while rotating 
it in the filter holder until you get the desired effect, then 
drop it in and you're good to go.

Walt


---------- Original Message ----------------------------------
From: Moose <olymoose@xxxxxxxxxxxxx>
Reply-To: olympus@xxxxxxxxxxxxxxx
Date:  Tue, 26 Aug 2003 22:22:08 -0700

>I don't have a Tamron 350, but I do  have other lenses with slip-
>in filter holders in the rear. In both cases there is a pretty 
>tight limit on filter thickness. I have a Zuiko 35.5mm 1A filter 
>that woun't quite fit in my Tokina AT-X 15-500/5.6. Mounts fine 
>in the holder, but won't quite fit in the slot. Since I have no 
>other use for it, I may cut down the front threads to make it 
>fit. Max thickness for a filter for the Sigma 800/8 is 3mm and 
>Sigma says no polarizer will work on one of their other back 
>filter lenses except their own. Not that it won't fit, but 
>the the desired polarizing effect won't be produced. Don't know 
>why that would be, but that's what they say.
>
>So first hurdle is finding a polarizer in the right thread size, 
>second, finding one thin enough, third, will it work properly. 
>Might be worth contacting the manufacturer before instituting a 
>big search.
>
>Moose
>
>Jeff Keller wrote:
>
>>There are polarizers made by other companies that are the right 
>>diameter but I don't know if they would work.
>>  
 


 
                   

< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz