on 10/09/2003 17:32, Julian Davies at julian_davies@xxxxxxxxxxxxxx wrote:
Hi Julian,
Thanks very much for your explanation, I'm reading it for the fifth time and
almost getting it. ;-))
Bad news, as I also told Paul:
> To see if this is your problem, tape over the quench contact on the shoe.
1) I have also shoe1. Installed it but T32 will not fire at 1/60.
2) I taped over the quench contact on shoe3, T32 will not fire at 1/60.
On both cases fires at 1/30.
Quite surprised that neither the .pdf at olympus.dementia.org/Hardware/, nor
the /esif/om-sif/bodygroup/om2.htm point this out. Not quite surprised my
OM-2 manual says 1/60 since it considers only the QuickAuto310 - T32 didn't
exist when published.
OTOH, it is mentioned on the T32 manual.
Any clue?
Again, I appreciate your thorough explanation.
Best,
Fernando
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|