Olympus-OM
[Top] [All Lists]

Re: [OM] Control pack charging

Subject: Re: [OM] Control pack charging
From: "Walt Wayman" <hiwayman@xxxxxxxxx>
Date: Tue, 28 Oct 2003 11:12:48 -0500
---------- Original Message ----------------------------------
From: Mark Dapoz <md@xxxxxxxxxxxx>
Reply-To: olympus@xxxxxxxxxxxxxxx
Date:  Tue, 28 Oct 2003 10:45:34 -0500 (EST)

>The instruction sheet for the relay cord says:
>
>"The Relay Cord 1.2m is used to connect the Motor Drive 1 to 
>either the Control Grip 1 or the M.AC Control Box."
>
>The sheet is dated Feb/78 which is well after the Ni-Cd Control 
>Pack was introduced.  All the photos and examples on the sheet 
>only show the Control Grip 1 and M.AC Control Box.  I doubt the 
>abscence of the Ni-Cd Pack is accidental.

Not to put too fine a point on it, but the last sentence of that 
paragraph says, "The Relay Cord can also be used with other DC 
power sources and remote control equipment."  What else might that 
be?  

My copy was printed March, 1979, so it's probably the same as 
yours, but the control pack manual I quoted from was printed two 
years later.

And although I've used the control pack/relay cord combo only a 
few times, I've never had a problem with the cord coming loose 
from the pack and the combination worked fine.

Walt

_____________________________________________________________
 "Patriotism means being loyal to your country all the time
 and to its government when it deserves it."  -- Mark Twain








 


 
                   

< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >




<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz