Olympus-OM
[Top] [All Lists]

Re: [OM] Manfrotto (Bogen) tripod head adapter plate

Subject: Re: [OM] Manfrotto (Bogen) tripod head adapter plate
From: "IanG" <I@xxxxxxxxxxx>
Date: Sat, 1 Nov 2003 13:52:17 -0000
thanks guys. having been shown the light from you a quick look at Jessops
site under Manfrotto shows exactly what I need. And to cap that I need to go
down town to their shop there this afternoon anyway. I feel just a little
bit silly now <duh>


Ian

-----Original Message-----
From: owner-olympus@xxxxxxxxxxxxxxx
[mailto:owner-olympus@xxxxxxxxxxxxxxx]On Behalf Of Walt Wayman
Sent: 01 November 2003 13:32
To: olympus@xxxxxxxxxxxxxxx
Subject: Re: [OM] Manfrotto (Bogen) tripod head adapter plate


Ian,

I ran into the same problem putting an old Bogen head on an even
older Cullmann tripod.  I searched on line for a couple of hours
with no luck, then walked into the neighborhood camera store,
intending to ask if they could recommend a solution, but before I
could open my mouth, I spied a package of 1/4" to 3/8" adapters on
a rack of accessories just inside the door.  Turns out they're
fairly common.  As I recall, they're less than $1 apiece, being
essentially simply a bushing having 1/4" threads inside and 3/8"
threads outside.

If they're still got them -- and I have no reason to think they
wouldn't -- I can pick one up for you and send it across the pond.

Walt

_____________________________________________________________
 "Patriotism means being loyal to your country all the time
 and to its government when it deserves it."  -- Mark Twain





---------- Original Message ----------------------------------
From: "IanG" <I@xxxxxxxxxxx>
Reply-To: olympus@xxxxxxxxxxxxxxx
Date:  Sat, 1 Nov 2003 12:37:06 -0000

>OM - content... I've just bought a manfrotto (bogen) 460mg 3 way
>head to put my OM4 on.  The female scRew fitting on the bottom OF
>the head is larger than the standard male tripod to camera
>fitting so I need an adapter plate which bolts onto the tripod
>and gives a suitable male screw size to fit the head.  I'm
>guessing this would be a 1/4" to 3/8" adapter. Does anybody know
>of a supplier - I've had no luck so far in the UK.
>
>thanks
>Ian
>






< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >




< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >




<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz