Olympus-OM
[Top] [All Lists]

Re: [OM] Will this work??

Subject: Re: [OM] Will this work??
From: Moose <olymoose@xxxxxxxxxxxxx>
Date: Sun, 07 Dec 2003 20:50:38 -0800
What you would like to do is clear. I believe all the bellows from Japan for 35mm cameras are made by the same manufacturer. If so, there is no need to mount uprights from one to another, as the camera mount on the rear simply comes off when the screw that holds it is loosened. So the camera mount from a C or N unit could be attached to an Oly unit and you have what you want.

The next question is whether this is cost effective, considering that you need to buy another bellows. The other solution if you are going Can*n is to get the OM to EOS adapter and mount it on the OM mount on the back of the bellows. The advantage of that would be the ability to use other OM lenses without the bellows.

Moose

Dean C. Hansen wrote:

Hi OMers,
   I do some macro work with the OM bellows and the 20/2, 38/2.8, and
80/4 OM macro lenses.  With the bellows, the double cable release first
closes down the diaphragm and then fires the shutter.  Essentially, it's
stopped-down metering, isn't it?
   Comparing my Olympus bellows with photos of both the Ni*on and C*n*n
bellows, it seems that the X-shaped rail in all three bellows models is
either the same or very similar.  It it is the same, could one remove
the Olympus camera mount from the OM bellows, replace it with the camera
mount from either the C*n*n or Ni*on bellows unit, and end up mounting
either a digital C*n*n or Ni*on camera on the OM bellows rail and hence
use the OM macro lenses with either of these two digital camera?  The
idea is clear in my mind;  have I explained it so anyone understands
what I'm proposing?  In essence, could one end up using a C*n*n 10D with
these fine OM macro lenses?
   Anyone have both the OM and one of these other bellows to compare?
Obviously, the axis of the camera mounts and the threads on the pinion
gears would have to be the same for this to work.




< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >




<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz