Olympus-OM
[Top] [All Lists]

[OM] Re: OM Metering

Subject: [OM] Re: OM Metering
From: "John Hermanson" <omtech@xxxxxxxxx>
Date: Wed, 29 Sep 2004 08:55:24 -0400
Silicon Blue cells are on the floor of the mirror box, these control auto. 
The CDS cells (one on either side of the eyepiece glass) read light off the 
screen for the manual reading.  They also provide the needle reading for the 
auto exposure.

John Hermanson
Camtech Photo Services, Inc.
21 South Lane,
Huntington, NY, 11743-4714,
631-424-2121, www.zuiko.com
_________________________________
----- Original Message ----- 
From: "Moose" <olymoose@xxxxxxxxxxxxxxx>
To: <olympus@xxxxxxxxxx>
Sent: Tuesday, September 28, 2004 6:07 PM
Subject: [OM] Re: OM Metering


> Julian Davies wrote:
>
>>That's the curtain design, not the meter weighting.
>>
> Yes, but which meter? There are 2 entirely separate metering systems in
> the OM-2(n).
>
>>The horizontal component of the centre weighting comes from the curtain, 
>>the
>>vertical component from the design of the meter array, with an overlap of
>>the fields of view of the two SBCs, if I remember my Pangerl correctly -
>>don't have it to hand.
>>
> Again, though, you aren't addressing the difference between Auto and
> Manual. What you propose assumes that the 2 systems are somehow
> overlapped or averaged. The SB cells have no effect on Auto exposure at
> all, it is entirely controlled by the cell on the bottom of the mirror
> box. Also, the curtain pattern has no effect at all on the SB cells, as
> they see only what is on the viewfinder screen. Thus the curtain pattern
> change changed Auto exposure shots from horizontal center weighted to
> overall average, but has no effect on the viewfinder metering system.
>
>>When the curtain changed, the meter array did not, leaving the metering as 
>>a
>>vertical line preferred.
>>
> This would be correct for Manual mode only, if the curtain pattern
> change affected that system, but not for Auto. I can't really believe
> that viewfinder metering, the only metering for manual use, would have a
> vertical pattern. One of the primary reasons for center weighted
> metering in the firat place is to avoid underexposure of subjects due to
> influence of the sky. Horizontal center weighting makes some practical
> photographic sense in many circumstances, vertical makes none at all.
>
> I've always assumed that the curtain pattern change was driven by 2
> issues. First, and most important, it won't work well in portrait
> orientation outdoors with sky and will give different exposures of the
> same subject with different camera orientation. Second, it could lead to
> exposure inconsistencies in mid range speeds where some of the metering
> is off the curtain and some off the film.
>
> Moose
>
>
>
> ==============================================
> List usage info:     http://www.zuikoholic.com
> List nannies:        olympusadmin@xxxxxxxxxx
> ==============================================
> 



==============================================
List usage info:     http://www.zuikoholic.com
List nannies:        olympusadmin@xxxxxxxxxx
==============================================

<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz