B Hinderks wrote:
>> The "speed gear" was just a teeny bit out of position with the speed
>> ring.
>
> How about sharing the info? My trusty old OM-4 is
> exhibiting the same symptoms.
I thought I had! But admit it was a bit brief.
If you take the ring off where the lenses mount, the ring gear sits
behind that. Be careful not to drop or damage the little reset switch on
the left at 9 o'clock.
Gently lift out the ring gear. You can see it engaged with a little cog
at the bottom. Move the cog a teeny bit one way. Replace ring gear and
lens mount ring and check the settings in the viewfinder and the
camera's action on RED-60 and RED-B. If all OK, screw into place. If
not, fiddle until you get it right.
That's how I did it, anyway. Took about 1/4 hr in total, I suppose.
Regards,
Simon
==============================================
List usage info: http://www.zuikoholic.com
List nannies: olympusadmin@xxxxxxxxxx
==============================================
|