Piers,
That's it, the thing I've got one of on five different tripods, and nestled
inside is the little QT plate that's on everything I can find with a 1/4 in.
threaded hole.
I don't know about the anti-twist stuff. If that refers to the little pin that
sticks up, it doesn't work with any of my gear. I suppose I could drill a hole
for it to fit in, but I'm not quite ready to try that. Like I said, twisting's
never been a problem. The only time I can recall having that happen was with
an OM-4T, MD2, 135/4.5 macro, 65-116 tube, T-Power Control 1 and T28 twin macro
flashes all together. That's a load, for sure, and it slipped only a little
when I picked up the tripod to move it and carelessly tilted the whole shebang
precipitately to the side. Tightening the screw more securely cured that.
Walt
--
"Anything more than 500 yards from
the car just isn't photogenic." --
Edward Weston
-------------- Original message ----------------------
From: "Piers Hemy" <piers@xxxxxxxx>
>
> Walt, having seen your Cullmann tripod modifications in the past, I have
> looked over this side of the pond for the Cullmann products, and the QR
> plates in particular. Despite them being German, they don't seem to have a
> strong presence.
>
> Would you take a look at this item and opine, is it the QR plate you
> recommend?
>
> http://www.hemy.me.uk/Miscellany/CullmannQR.jpg
>
> Thanks very much! And, by the way, if it *is* the right one, it looks like
> there is an anti-twist plate available
>
> For the benefit of those who drive on the wrong side of the road, it's an
> extract from the Speedgraphic catalogue (and the prices are in GBP). No,
> that is not a misprint for "Speed Graphic", but I am sure it is not a
> coincidental choice of name.
>
> --
> Piers
>
> -----Original Message-----
> From: olympus-owner@xxxxxxxxxx [mailto:olympus-owner@xxxxxxxxxx] On Behalf
> Of Walt Wayman
> Sent: 27 April 2005 19:27
> To: olympus@xxxxxxxxxx
> Subject: [OM] Re: WAS: Re: WTB: Bogen/Manfrotto 410/3275, etc. NOW: Cullman
> plate system
>
> The top side of the QR plate is rubber, with lots of little nubby thingies
> which grip like a good tire/tyre*. I tighten 'em up securely with a two-bit
> piece, a nickel, a key, or whatever is handy that fits the screw head, and
> have had problems with slippage only with really heavy stuff when I didn't
> apply the appropriate torque. Honestly, it's not a problem.
>
> Walt
>
> *Trying to consider those who drive on the wrong side of the road and spell
> funny.
>
> --
> "Anything more than 500 yards from
> the car just isn't photogenic." --
> Edward Weston
>
> -------------- Original message ----------------------
> From: ScottGee1 <scottgee1@xxxxxxxxx>
> >
> > I'm intrigued by the Cullman plate system. From what I see in the pix,
> > the plates are not anti-twist design - is that correct?
> > If so, how do you snug them up so they don't twist?
> > TIA!/ScottGee1
> >
> ==============================================
> List usage info: http://www.zuikoholic.com
> List nannies: olympusadmin@xxxxxxxxxx
> ==============================================
>
>
> ==============================================
> List usage info: http://www.zuikoholic.com
> List nannies: olympusadmin@xxxxxxxxxx
> ==============================================
==============================================
List usage info: http://www.zuikoholic.com
List nannies: olympusadmin@xxxxxxxxxx
==============================================
|
