Olympus-OM
[Top] [All Lists]

[OM] Re: Case for OM4T?

Subject: [OM] Re: Case for OM4T?
From: ScottGee1 <scottgee1@xxxxxxxxx>
Date: Wed, 4 May 2005 08:34:49 -0400
Proof again that a picture is worth a thousand words.  Very helpful indeed!

Thanks!/Scott

On 5/4/05, Piers Hemy <piers@xxxxxxxx> wrote:
> 
> Serendipity strikes!  This page has pictures of most of the different case
> types:
> 
> http://osmaps.tripod.com/Olympus/ERC.htm
> 
> It is missing a picture of the early pebbled-finish tripod screw fixing
> "piledriver" version, but others have described that pretty well.
> 
> Additionally, nobody has so far mentioned the Winder case, which is
> described in the eSIF, but without the explanation that it can also be used
> with MD1 and M15v (as well as Winder).  It is certainly not an ERC, because
> you have to remove the case to use the camera, but it does do an adequate
> job of protecting a pristine body while in transit.
> 
> I came across the above page a month ago, following a link on old maps.  I
> don't understand the connection (except that someone else shares two of my
> interests!).  It took me a while to find it again (and as you can see, the
> site name is not obviously helpful) but Copernic Desktop Search came up
> trumps for its facility to search the Firefox browser history.
> 
> http://www.copernic.com/en/products/desktop-search/index.html
> 
> --
> Piers
> 
> 
> -----Original Message-----
> From: olympus-owner@xxxxxxxxxx [mailto:olympus-owner@xxxxxxxxxx] On Behalf
> Of ScottGee1
> Sent: 03 May 2005 22:54
> To: olympus@xxxxxxxxxx
> Subject: [OM] Case for OM4T?
> 
> OK.  Once again, I tried the archives and eSIF and gleaned some wisdom on
> this, but am still a bit confused.
> 
> Did Olympus make cases specific to certain models?
> 
> From what I can tell, (n)everready cases are interchangeable amongst the
> single digit OM bodies - 1, 2, 3, 4.  The variables seem to be the self
> timer and synch-cord port - correct?
> 
> Also some cases apparently allow them to remain on the camera when a tripod
> is used - or do they all do that?  I'm guessing that the appropriate
> threading is replicated in the fastener at the bottom of the case that is
> used to tighten the body into the case.
> 
> And yes, I realize some folks find these things an abomination but there are
> times that I just want to head out with one lens and want to keep the whole
> thing from getting bumped or bruised.
> 
> TIA!/ScottGee1
> ==============================================
> List usage info:     http://www.zuikoholic.com
> List nannies:        olympusadmin@xxxxxxxxxx
> ==============================================
> 
> ==============================================
> List usage info:     http://www.zuikoholic.com
> List nannies:        olympusadmin@xxxxxxxxxx
> ==============================================
>
==============================================
List usage info:     http://www.zuikoholic.com
List nannies:        olympusadmin@xxxxxxxxxx
==============================================

<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz