Olympus-OM
[Top] [All Lists]

[OM] Re: F280 parts list required or advice in disassembly

Subject: [OM] Re: F280 parts list required or advice in disassembly
From: "Piers Hemy" <piers@xxxxxxxx>
Date: Fri, 6 May 2005 16:49:37 +0100
Holding F280 upside down, flash facing to the right, this is what I see:

   |\   |\

   Flash fires in this direction >>>>>

I _think_ that confirms what you are saying.


--
Piers 
 
-----Original Message-----
From: olympus-owner@xxxxxxxxxx [mailto:olympus-owner@xxxxxxxxxx] On Behalf
Of swisspace
Sent: 06 May 2005 16:20
To: olympus@xxxxxxxxxx
Subject: [OM] Re: F280 parts list required or advice in disassembly

Has anyone an F280 to hand, unfortunately I can't find any larger screws, so
I am going to put a little bit of epoxy (not too much though
Mark) where the threads were, but before I commit to this could  someone
please look at the pins  underneath and confirm that they all slope the same
way and that the shallower slope is at the front as it slides onto the
hotshoe.

in profile the contacts vary in size but the bits you can see look something
like this.

deeper slope  *       *    shallower slope
                *    *
                 * *


thanks in advance


==============================================
List usage info:     http://www.zuikoholic.com
List nannies:        olympusadmin@xxxxxxxxxx
==============================================


==============================================
List usage info:     http://www.zuikoholic.com
List nannies:        olympusadmin@xxxxxxxxxx
==============================================

<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz