I may be nuts here, but Loctite? One of the 'not so permanent'
varieties, perhaps.
-----Original Message-----
From: olympus-owner@xxxxxxxxxx [mailto:olympus-owner@xxxxxxxxxx] On
Behalf Of Jeff Keller
Sent: Monday, November 13, 2006 9:20 AM
To: olympus@xxxxxxxxxx
Subject: [OM] Re: Meter on OM-4Ti
Is there a prefered way to keep the screw from moving? One of my cameras
has a very loose screw which needs to be adjusted almost every time I
use it for more than a couple hours.
-jeff
On 11/13/06, John Hermanson <omtech1@xxxxxxxxxxx> wrote:
>
> Sounds like the adjustment screw inside the release button is set too
> high. If you look inside the hole where the cable release goes, you
> should see the head of a small slotted screw. using a #2 screwdriver,
> carefully turn the screw down a revolution or two, then try relight
> function. Shutter should fire just before the button mechanically
> bottoms out. If you turn screw too far, relight function may stop
> working.
>
> ___________________________________
> John Hermanson
> Camtech Photo Services, Inc.
> 21 South Lane, Huntington NY 11743
> 631-424-2121 | Olympus OM Service since 1977 http://www.zuiko.com |
> omtech1 AT verizon.net
==============================================
List usage info: http://www.zuikoholic.com
List nannies: olympusadmin@xxxxxxxxxx
==============================================
This message (including any attachments) contains confidential
and/or proprietary information intended only for the addressee.
Any unauthorized disclosure, copying, distribution or reliance on
the contents of this information is strictly prohibited and may
constitute a violation of law. If you are not the intended
recipient, please notify the sender immediately by responding to
this e-mail, and delete the message from your system. If you
have any questions about this e-mail please notify the sender
immediately.
==============================================
List usage info: http://www.zuikoholic.com
List nannies: olympusadmin@xxxxxxxxxx
==============================================
|