Mosse ,
when you say total depth, is the part that is 49mm the same depth as the
72mm part?
Tim Hughes
--- Moose <olymoose@xxxxxxxxx> wrote:
> Tim Hughes wrote:
> > I am not completely sure I understand the problem:
> > Is it the thickness of the metal from extreme outer edge of lens thread to
> > inner smooth edge
> of
> > circle is too great on a generic? If so, could somebody measure a real one
> > with a micrometer
> and
> > post size to the list, so people can try to shop for the correct thickness?
> My little plastic fantastic digital micrometer says 1.0 mm. The solid
> part behind the threads is really thin. I'd be interested to see if a
> generic one cut down in a lathe as Wayne suggests would be strong enough.
>
> It is also a rather shallow adapter, about 9.5 mm total depth.
>
> Moose
>
> ==============================================
> List usage info: http://www.zuikoholic.com
> List nannies: olympusadmin@xxxxxxxxxx
> ==============================================
>
==============================================
List usage info: http://www.zuikoholic.com
List nannies: olympusadmin@xxxxxxxxxx
==============================================
|