Olympus-OM
[Top] [All Lists]

[OM] Re: Classic (or old) Vivitar Lens: Loose rubber grip on focus ring

Subject: [OM] Re: Classic (or old) Vivitar Lens: Loose rubber grip on focus ring - how to repair?
From: Chuck Norcutt <chucknorcutt@xxxxxxxxxxxxxxxx>
Date: Sat, 03 Nov 2007 07:23:14 -0400
I don't think it would work very well.  Rubber cement is normally 
applied in a very thin layer to both bonding surfaces and allowed to air 
dry before attaching the surfaces under pressure.  It's generally pretty 
easy to simply roll the rubber back on itself, wrap a strip of double 
stick tape around the exposed barrel and then unroll the rubber.

Chuck Norcutt

Johann Thorsson wrote:
> What about injecting some rubber cement through the rubber grip using a 
> syringe?
> 
> J
> 
> 
> ----- Original Message ----- 
> From: "Chuck Norcutt" <chucknorcutt@xxxxxxxxxxxxxxxx>
> To: <olympus@xxxxxxxxxx>
> Sent: Friday, November 02, 2007 17:21
> Subject: [OM] Re: Classic (or old) Vivitar Lens: Loose rubber grip on focus 
> ring - how to repair?
> 
> 
>> Depends how loose it is.  The simple fix is to roll the rubber sleeve
>> back on one end and put a ring of thin, double stick tape around the
>> focus ring and then roll the rubber ring back into place.  Then repeat
>> on the other end.  That, of course, assumes there's enough elasticity
>> left in the rubber to stretch for the rolling back.
>>
>> If it's so loose that it's really sloppy you could roll it back
>> completely and then wrap a spacer around the ring also stuck to the ring
>> with double stick tape.  Then replace the ring and repeat the trick
>> above doing one end at a time.  If it's really, really loose some might
>> try taking a slice out of the ring with a very sharp razor blade.  If
>> the rubber has a diamond pattern embossed in it you can cut diagonally
>> along a groove.  If you remove a complete diamond you can make a fairly
>> well hidden seam.  Do some trial fitting and then rewrap the rubber
>> around the focus ring with double stick tape under the seam.
>>
>> Chuck Norcutt
>>
>> Ali Shah wrote:
>>> Got a 200mm Vivitar lens. Nice lens, except the rubber
>>> grip around the focus ring is loose and moves instead
>>> of turning the ring. How can fix this?
>> ==============================================
>> List usage info:     http://www.zuikoholic.com
>> List nannies:        olympusadmin@xxxxxxxxxx
>> ============================================== 
> 
> 
> ==============================================
> List usage info:     http://www.zuikoholic.com
> List nannies:        olympusadmin@xxxxxxxxxx
> ==============================================
> 
> 
> 

==============================================
List usage info:     http://www.zuikoholic.com
List nannies:        olympusadmin@xxxxxxxxxx
==============================================

<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz