My E-PL1 certainly increase shutter lag when IS is enabled. As far as I
remember the 28-135 IS I owned need 0.5 second or so before IS is stable but
you can half-press the shutter to enable the IS in advance. Unfortunately,
you can't do that with the E-PL1.
C.H.Ling
----- Original Message -----
From: "Chuck Norcutt" <chucknorcutt@xxxxxxxxxxxxxxxx>
To: "Olympus Camera Discussion" <olympus@xxxxxxxxxxxxxxxxx>
Sent: Friday, July 22, 2011 11:37 PM
Subject: Re: [OM] (E-M) Multiple exposures
> If anti-shake is simply moving the sensor in response to motions of the
> camera body why should it have a delaying effect on the shutter?
>
> Chuck Norcutt
>
>
> On 7/22/2011 11:19 AM, Ian Nichols wrote:
>> On 22 July 2011 14:57, Chuck Norcutt<chucknorcutt@xxxxxxxxxxxxxxxx>
>> wrote:
>>> If you are experiencing long shutter delays the most likely culprit is
>>> autofocus.
>>
>>
>> Sounds like it could be the "anti shake" feature - whereby the mirror
>> goes up but the shutter release is delayed. Brian: You'll have to
>> investigate the menus to switch it off again if it is that.
--
_________________________________________________________________
Options: http://lists.thomasclausen.net/mailman/listinfo/olympus
Archives: http://lists.thomasclausen.net/mailman/private/olympus/
Themed Olympus Photo Exhibition: http://www.tope.nl/
|