Olympus-OM
[Top] [All Lists]

Re: [OM] Oly 4/3 vs m4/3 lens mounts and adapters

Subject: Re: [OM] Oly 4/3 vs m4/3 lens mounts and adapters
From: Martin Walters <mwalters@xxxxxxxxxx>
Date: Tue, 14 May 2013 21:05:17 -0400
Chuck:
4/3 lenses only fit on m4/3 with an adapter (MMF2 or 3, I think). So, 
your  OM to 4/3 will not fit either.

I thought that the crop factor on the 4/3 (or m 4/3) sensor gave greater 
magnification than on 35mm (or full frame). I'll let others correct me here.

Martin

On 14/05/2013 7:40 PM, Chuck Norcutt wrote:
> Can someone who has both systems verify whether or not a 4/3 lens fits
> on a m4/3 camera?  I know it won't focus properly and maybe not even
> operate electrically.  My only real concern is whether a 4/3 lens (or OM
> to 4/3 adapter) physically fits into an m4/3 body.
>
> The reason I ask is that I was trying to use my OM bellows and slide
> copier today to see if I could copy slides onto my E-M5.  To do that I
> need a magnification of approx 0.5X.  If I had a Zuiko 80/4 short mount
> macro lens for the bellows I'd be OK.  But my only two macro lenses are
> my 90/2.5 Viv S1 and my 50/3.5 Zuiko.
>
> I don't think I can get the 90/2.5 to work at all since at 0.5X I think
> the image of a slide is somewhere beyond the length of the bellows rail.
>    The 50/3.5 macro is only designed to do about 0.68X on the bellows.
> The bellows itself prevents it from getting to 0.5X.  The limitation is
> imposed by the minimum separation of the lens board and camera mounting
> board.  According to my possibly dodgy calculations the image plane
> needs to be brought forward about 14mm.  If you were using an OM or 4/3
> body that wouldn't be possible.  However, I note that the 4/3 to OM
> adapter is about 20mm shorter than the m4/3 adapter.  If I had a 4/3
> adapter on the m4/3 body I think that would give me the extra range I
> need to bring the image plane in and get the 50/3.5 to do 0.5X or
> slightly smaller.
>
> So, can someone answer the physical compatibility question between the
> two mounts, ie, will a 4/3 lens fit onto a m4/3 mount even though it
> might not actually work electrically and certainly can't focus even if
> it physically fits?
>
> Assuming it does, anyone got a spare OM to 4/3 mount you'd like to move
> on?  Maybe an old one with no AF confirmation chip?  I won't be needing
> anything like that.
>
> Chuck Norcutt
>

-- 
_________________________________________________________________
Options: http://lists.thomasclausen.net/mailman/listinfo/olympus
Archives: http://lists.thomasclausen.net/mailman/private/olympus/
Themed Olympus Photo Exhibition: http://www.tope.nl/

<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz