Olympus-OM
[Top] [All Lists]

Re: [OM] E-520 question

Subject: Re: [OM] E-520 question
From: Chuck Norcutt <chucknorcutt@xxxxxxxxxxxxxxxx>
Date: Mon, 13 Apr 2015 18:04:21 -0400
It sounds to me like you may have autobracketing enabled. (see page 50 of the E-520 manual). Normally one would get three exposures... a base exposure and then a negative exposure compensation followed by positive exposure compensation with the exposure difference according to the settings you've chosen in the camera.

Exposure 613 looks like the negative exposure adjustment while 614 looks like the positive exposure adjustment. What's missing is image 612 which would be the base exposure if I'm right about autobracketing. The bracketing process is interrupted if you don't leave your finger on the shutter button long enough to get all 3 exposures. It all hangs together for me except for missing image 612.

Ooops! I just blew my theory out of the water by looking at the EXIF data from both images. Both say ISO 200, f/4, 1/800 sec, exp comp -0.3

Sorry, I don't have a clue.  Is it repeatable?

Chuck Norcutt


On 4/13/2015 4:57 PM, Goss,Steve wrote:
Hi, Y'all-
I took these two shots Saturday. The camera was set for multiple shots, and 
made two exposures while I had my finger on the shutter button. Since the 
second one was taken immediately after the first one, I would expect the 
exposures to be the same. But they aren't. I've seen this several times with 
this camera, and I'm wondering whether this is normal for the 520, or whether 
it needs to be repaired. My E-510 doesn't do this.
  There was a 16 minute gap between the first picture and the previous one, if 
that makes a difference.

http://zone-10.com/tope2/main.php?g2_itemId=17029
http://zone-10.com/tope2/main.php?g2_itemId=17032
No editing has been done to ether image.

Thanks,
Steve Goss | MDI System Engineer | Cerner Corporation | Mobile: (816) 885-3259 | Fax: (816) 
571-8560 | sgoss@xxxxxxxxxx<mailto:sgoss@xxxxxxxxxx> | 
www.cerner.com<http://www.cerner.com/>
For latest news and information on DeviceWorks Solutions please visit: 
https://www.ucern.com/community/cerner/solution_forums/groups/devices-community

I will be out of the office the week of April 27 and during Cerner standard 
holidays



CONFIDENTIALITY NOTICE This message and any included attachments are from 
Cerner Corporation and are intended only for the addressee. The information 
contained in this message is confidential and may constitute inside or 
non-public information under international, federal, or state securities laws. 
Unauthorized forwarding, printing, copying, distribution, or use of such 
information is strictly prohibited and may be unlawful. If you are not the 
addressee, please promptly delete this message and notify the sender of the 
delivery error by e-mail or you may call Cerner's corporate offices in Kansas 
City, Missouri, U.S.A at (+1) (816)221-1024.

--
_________________________________________________________________
Options: http://lists.thomasclausen.net/mailman/listinfo/olympus
Archives: http://lists.thomasclausen.net/mailman/private/olympus/
Themed Olympus Photo Exhibition: http://www.tope.nl/

<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz