Olympus-OM
[Top] [All Lists]

RE: [OM] OTF in IS-3?

Subject: RE: [OM] OTF in IS-3?
From: "Per Nordenberg" <per.nordenberg@xxxxxxxxxx>
Date: Mon, 9 Mar 1998 13:36:18 +0100
-----Ursprungligt meddelande-----
Från: John Hermanson <omtech@xxxxxxxxx>
Till: olympus@xxxxxxxxxxxxxxx <olympus@xxxxxxxxxxxxxxx>
Datum: den 7 mars 1998 18:01
Ämne: Re: [OM] OTF in IS-3?


>Per Nordenberg wrote:
>
>> -----Ursprungligt meddelande-----
>> Från: John Hermanson <omtech@xxxxxxxxx>
>> Till: olympus@xxxxxxxxxxxxxxx <olympus@xxxxxxxxxxxxxxx>
>> Datum: den 1 mars 1998 22:41
>> Ämne: Re: [OM] OTF in IS-3?
>>
>>>At a factory set combination of asa-distance the camera switches  between 
>>>top flash tube (low power) and >>>bottom flash tube (higher power.)  There 
>>>is no otf flash control or cell to read flash exposure as in a regular 
>>>>>>auto flash (thyristor).
>>>The IS-3 will set f stop with flash based on distance but also which flash 
>>>tube is going off., but that is the >>>only control it has.
>> >
>> >John
>> >Camtech
>> >
>> When the built-in GN28 flash and the optional G40 flash are used together 
>> the G40 fires full emission, but the built-in GN28 flash is compensated by 
>> -3EV. I know what exposure values means, but what exactly does this mean? It 
>> can´t be that compensation is by aperture value, because that would effect 
>> the G40 as well. Is just the upper GN20 tube fired in this situation?
>>
>My experience with the G40 is limited.  But based on your letter, it sounds 
>like that the built in flash automatically underexposes by 3 stops when the 
>G40 is used.
>


Thanks John. Isn´t there anyone else out there with IS-3/G40 experience that 
can elaborate on this? How can the built-in GN28 flash underexpose 3 stops and 
not the G40, ie. without reducing the output?

Best regards,
Per Nordenberg 





############################################################
| This message was delivered via the Olympus Mailing List
| To receive the Digest version mailto:listserv@xxxxxxxxxxxxxxx
|    with "subscribe olympus-digest" in the message body.
| To unsubscribe from the current list mailto:listserv@xxxxxxxxxxxxxxx
|    with "unsubscribe olympus" in the body.
| For questions mailto:owner-olympus@xxxxxxxxxxxxxxx
| Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html
############################################################


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz