Thats "directly" not diectly.
John
John Hermanson wrote:
>
> The 3 pin connector on the flash allows 300V to go diectly into the main
> cap.
>
> John
>
> Paul Haigney wrote:
> >
> > Hi Wayne
> > I did not use the 3 pin connector on the T32 at all.
> > I just remove the battery cover and connect to the + & - contacts.
> > I did look at using the 3 pin connector but I decided to take the
> > easy route,as you look at the diagram below the pins are
> > left to right....+ , - , and negative ,,,,,I THINK.
> > The batts I used are made by Hawker, they have a web site
> > a sealed lead rechargable battery,,type 2 volt,,12.5AH,,J cell.
> > RGds Paul
> >
> > >
> > > Paul, I was not clear on you pin description.
> > >
> > > -----------
> > > | * |
> > > | * * |
> > > -----^-----
> > >
> > > as you look at the pins from the front, which are which?
> > >
> > > Wayne
> > >
> > >
> > > < This message was delivered via the Olympus Mailing List >
> > > < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> > > < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
> > >
> > >
> > >
> > Word's of Wisdom,..only make "SNAP" decisions when buying OM gear !!
> >
> > < This message was delivered via the Olympus Mailing List >
> > < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> > < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|