I hope they do a good job for you. A good way to get a camera to exhibit
shutter
lock is at the manual shutter speed of 1/1000.
John
Paul Haigney wrote:
> Hi John
>
> I took your advice and left it with the repair shop,he feels it's the magnet,
> he
> worked for Olympus when they still had an Irish branch here .
>
> Rgds Paul Haigney Dublin IRELAND
>
> John Hermanson wrote:
>
> > I never recommend home fixes cus then it might cost you 80 pounds to get it
> > fixed. If you are a tech, then you may be okay.
> > You'll have to remove the floor of the mirror bix. The front peice is held
> > in with a 1.4mm screw. Youll need an offset screwdrive to get the screw
> > out. The main part of the floor is glued in and has one wire soldered to a
> > tab near the front. This is the part where some people use a screwdriver to
> > pop the floor up and end up cracking the circuit, tearing the magnet winding
> > etc.
> > You'll have to clean the magnet and gold plated trigger switch (left,
> > front) with a good
> > degreaser. There could be about 10 things causing lockup. Check your
> > batteries first. Using alkaline or lithium cells in cold waether can be the
> > start of your problems.
> >
> > John
> > Camtech
> >
> > > ##################################################################
> > > # This message was delivered via the Olympus Mailing List
> > > # To receive the Olympus Digest send mail to: listserv@xxxxxxxxxxxxxxx
> > > # with subscribe olympus-digest in the message body.
> > > #
> > > # To unsubscribe from the current list send a message to
> > > # listserv@xxxxxxxxxxxxxxx with unsubscribe olympus in the message body.
> > > #
> > > # For questions email: owner-olympus@xxxxxxxxxxxxxxx
> > > ##################################################################
> >
> > ##################################################################
> > # This message was delivered via the Olympus Mailing List
> > # To receive the Olympus Digest send mail to: listserv@xxxxxxxxxxxxxxx
> > # with subscribe olympus-digest in the message body.
> > #
> > # To unsubscribe from the current list send a message to
> > # listserv@xxxxxxxxxxxxxxx with unsubscribe olympus in the message body.
> > #
> > # For questions email: owner-olympus@xxxxxxxxxxxxxxx
> > ##################################################################
>
> ##################################################################
> # This message was delivered via the Olympus Mailing List
> # To receive the Olympus Digest send mail to: listserv@xxxxxxxxxxxxxxx
> # with subscribe olympus-digest in the message body.
> #
> # To unsubscribe from the current list send a message to
> # listserv@xxxxxxxxxxxxxxx with unsubscribe olympus in the message body.
> #
> # For questions email: owner-olympus@xxxxxxxxxxxxxxx
> ##################################################################
##################################################################
# This message was delivered via the Olympus Mailing List
# To receive the Olympus Digest send mail to: listserv@xxxxxxxxxxxxxxx
# with subscribe olympus-digest in the message body.
#
# To unsubscribe from the current list send a message to
# listserv@xxxxxxxxxxxxxxx with unsubscribe olympus in the message body.
#
# For questions email: owner-olympus@xxxxxxxxxxxxxxx
##################################################################
|