Olympus-OM
[Top] [All Lists]

Re: [OM] Re: Film loading question

Subject: Re: [OM] Re: Film loading question
From: Charles Packard <packardc@xxxxxxxxxx>
Date: Fri, 12 May 2000 12:57:44 -0500
Brett,
I am assuming that the roll of film came off the take up spindle before you
began
shooting. This question was the subject of a recent thread. A list member I've
forgotten who, sugggests the following: Take the film leader insert it into the
take-up
spindle and advance the winder one or two times to ensure that the film is being

properly taken up, then place the the film cannister in its compartment.
Close the door and you're ready.
I've tried this method and it is a lot easier than the way I've been doing it
all
these years. That was to place the cannister in its comprtment, pull the leader
across
a then stick it in the take up spool and advance the winder.
I thought just occured to me, are you aware that the OM's are not designed to
self-feed the film leader into the take-up spindle.

OM content: Just acquired a zuiko 135 f/2,8. Lordly I love this lens!!!

Gotta go, too late. hi boss.

Brett Lucas wrote:

> Hi.
>
> I have recently inherited an Olympus OM-2.  So far it
> has been a great camera.
>
> Recently I have had a weird incident in the film
> loading.  Recently I loaded the 35mm film roll into
> the camera, and inserted the tail end of the film roll
> into the take up spool, and closed the back of the
> camera.  I then started shooting off the roll of film.
>  The frame counter continued to tick off each shot up
> to 36.  When I thought I completed the roll of film, I
> then started the rewind process.  The rewind was to
> easy, and there was no resistance from the film.  Has
> anyone else had this problem.  Any suggestions, to
> help me alleviate this problem for the future.
>
> Thanks...
>
> __________________________________________________
> Do You Yahoo!?
> Send instant messages & get email alerts with Yahoo! Messenger.
> http://im.yahoo.com/
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz