Olympus-OM
[Top] [All Lists]

Re: [OM] Oly 4/3 vs m4/3 lens mounts and adapters

Subject: Re: [OM] Oly 4/3 vs m4/3 lens mounts and adapters
From: Chuck Norcutt <chucknorcutt@xxxxxxxxxxxxxxxx>
Date: Wed, 15 May 2013 12:30:07 -0400
Thanks, I figured the 80mm would work since that's the recommended way 
to get to 0.5X. I'm surprised by the distance but looking at the bellows 
table it shows more than 20cm between lens and subject for 0.5X

Chuck Norcutt


On 5/15/2013 9:09 AM, Frank Wijsmuller wrote:
> Just tested the bellows with e-m5 and 80mm.
>
> The good news is yes, you can get the full slide in sharp view. But
> unfortunately the gap between slide and lens is too big for the built-in
> shade to bridge.
>
> Picture of this set up here: <
> http://zone-10.com/tope2/main.php?g2_itemId=5356>
>
> Success, Frank
>
>
> 2013/5/15 Wayne Harridge
>
>>
>> Something like this should work:
>>
>>
>> http://www.structuregraphs.com/RandomStuff/15-May-2013/index.html#20130515-A
>> .jpg
>>
>> What is the situation
>> with the E-M5 ?
>>
>> To get good contrast you'd probably need to cover the gap between the lens
>> and slide copier with a dark cloth.
>>
-- 
_________________________________________________________________
Options: http://lists.thomasclausen.net/mailman/listinfo/olympus
Archives: http://lists.thomasclausen.net/mailman/private/olympus/
Themed Olympus Photo Exhibition: http://www.tope.nl/

<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz