And no fixture for a wrist strap on the CP2, if I am not mistaken. The devil
is in the details!
--
Piers
-----Original Message-----
From: olympus-owner@xxxxxxxxxx [mailto:olympus-owner@xxxxxxxxxx] On Behalf
Of John Hermanson
Sent: 16 October 2006 14:07
To: olympus@xxxxxxxxxx
Subject: [OM] Re: Need for rebuild on M. 15V Ni-Cd Control Packs - Yes or
No?
CP1 and CP2 are identical inside. Only differences are to attachment screw,
outer edge of mode knob, and name plate.
___________________________________
John Hermanson
Camtech Photo Services, Inc.
21 South Lane, Huntington NY 11743
631-424-2121 | Olympus OM Service since 1977 http://www.zuiko.com |
omtech1 AT verizon.net
Piers Hemy wrote:
> Barnaby, I have/have had several CP1. I have never seen a CP2. It is
> certainly possible that a CP1 will still be usable without the need
> for a rebuild, although with lower capacity than it had originally.
> But if all you are going to do is burn 2-3 36-exp films in a day, I
> can't see that the lower capacity is going to be a show-stopper problem.
>
> If you have doubts about whether there is *any* capacity left in what
> you are buying, then set your price accordingly, and budget for a
> rebuild (with NiMH cells). I would guess somewhere in the
> USD50-USD100 range. If you can't find a repair shop in Denmark, I can
suggest a shop in UK.
>
> In my experience, you can't tell just by looking at the outside what
> has been done inside (I had to mark my rebuilt CP1 to show which was
which).
>
> --
> Piers
>
==============================================
List usage info: http://www.zuikoholic.com
List nannies: olympusadmin@xxxxxxxxxx
==============================================
==============================================
List usage info: http://www.zuikoholic.com
List nannies: olympusadmin@xxxxxxxxxx
==============================================
|